798646e1

12.7.9. Removal and installation of a steering damper

Utiliti's (Van) models (Utility) and Cab Chassis

Removal

 PERFORMANCE ORDER

  1. Car front also establish to Poddomkratta it on props. Mark the provision of a reference point of a steering damper on the car chassis (location of a steering damper on Utiliti's (Van) models and the Mini-truck is shown on an accompanying illustration).
1 — the pendular lever of cross steering draft
2 — a steering damper
3 — connecting draft
4 — longitudinal steering draft
  1. Give nuts of fastening of a steering damper to the chassis and cross steering draft.
  2. Remove a steering damper from the car, trying not to damage at the same time rubber plugs.
  3. Undertake a steering damper for both ends and several times completely squeeze it, stretching then against the stop. If during a damper breakthroughs and points of jamming are observed, it should be replaced.
  4. Examine a damper outside on existence of traces of leak of liquid, dents and other damages. In case of need make replacement.
  5. Estimate a condition of rubber plugs, in case of need replace them.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

  1. Track combination of the landing tags of reference points of a damper put in the course of dismantle.
  2. Strongly tighten fixing nuts.