798646e1

9.2.8. Adjustment of brake tapes (model of 4.2 l of EFI)

Adjustment of brake films AT does not belong to standard procedures of service and need of its performance for normal conditions usually is absent. Emergence of such need speaks about wear of transmission.

The adjusting screw is located in the top part of the left wall of transmission behind a rotation converter dome. Removal of a cross beam a certain lowering of transmission can be necessary for ensuring access to the screw.

 PERFORMANCE ORDER

  1. Car front also establish to Poddomkratta it on props.
  2. Weaken a lock-nut of the adjusting screw on several turns, watching to shifting the screw.
  3. Tighten the adjusting screw with effort of 4 ÷ 6 Nanometers.
  4. Weaken the screw exactly on two and a half turns.
  5. Fix the screw not movably and strongly tighten a lock-nut.
  6. Lower the car on the earth and carry out its trial runs, checking serviceability of functioning of transmission.