798646e1

9.2.5. Service of the switch of the power modes

Models of early years of release (with carburetor distances of 4.2 l and 3.0 l)

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  1. By means of the small screw-driver carefully separate the switch panel from the selector lever (see an accompanying illustration).
  1. Disunite the electric socket and remove the switch from the lever.
  2. Check existence of conductivity between socket plugs. At position of the POWER switch conductivity has to take place, at position of AUTO - no. In case of need replace the switch.
  3. Installation is made upside-down.

Models of late years of release of 4.2 l of EFI

 PERFORMANCE ORDER

  1. The small screw-driver carefully hook the switch, releasing it from the central part of the dashboard (see an accompanying illustration).
  1. Disconnect an electrical wiring and remove the switch from the car.
  2. Execute check of the switch:
    1. In situation POWER conductivity has to take place between switch plugs 2 and 7.
    2. In position of HOLD there has to be a conductivity between plugs 2 and 3.
  3. In case of need replace the switch.
  4. Installation is made upside-down.