14:10. Service of a cleaner of back glass
Removal and installation of a brush and working element
|
|
Procedures are similar described for screenwashes (see an accompanying illustration). |
Removal and installation of the lever of a screen wiper
Removal
|
|
- Remove a spare wheel from a back door.
- Remove a protective cover and give a nut of fastening of the lever on an axis.
|
|
- Having carefully hooked, remove the lever from an axis (see an accompanying illustration).
|
|
|
Installation
Installation is made upside-down.
|
|
- Put on the lever an axis and level a brush, having arranged it in 55 ÷ 65 mm over a sealing tape of glass. The motor should be given to parking situation previously.
- Strongly tighten a nut of fastening of the lever on an axis.
|
|
Removal and installation of the motor of the drive of a screen wiper
Removal
|
|
- Disconnect a negative wire from the battery.
- Remove the screen wiper lever.
- Remove the panel of internal finishing of a door of a back.
- Disunite the electric socket on the motor.
- Give fixing bolts (see an accompanying illustration) and remove the motor from the car.
|
|
Installation
Installation is made upside-down.
|
|
- Check quality of contacts of the electric socket and track reliability of its fastening.
- Strongly tighten bolts of fastening of the motor.
- Adjust the provision of a brush on glass.
|
|
