798646e1

13.9. Removal and installation of a cowl

Removal

 PERFORMANCE ORDER

  1. Lift a cowl and record it an emphasis.
  2. Cover mudguards of both wings with special covers or just old blankets for protection of a paint and varnish covering. Pay special attention to protection of the sites located under corners of a cowl.
  1. Disconnect a hose of supply of liquid of washing of a windshield from hoses on a cowl (see an accompanying illustration).
  1. Marker lead round plates of loops, having marked their arrangement on a cowl.
  2. Give bolts of fastening of plates of loops to a cowl, remove washers. By means of the assistant remove a cowl from the car.

Installation

 PERFORMANCE ORDER

  1. By means of the assistant install a cowl on the car, having recorded it in front an emphasis.
  2. Screw fastening bolts to a cowl of plates of loops (do not forget to establish washers under their heads). Level loops according to the landing tags put in the course of dismantle, only after it you can strongly tighten bolts.
  3. Ask the assistant to hold the cowl lock in open situation a driving cable, close a cowl.
  4. Check correctness of an arrangement of side edges of a cowl in relation to wings of the car and the rear edge in relation to the body panel.
  5. In case of need adjustments weaken bolts of fastening of loops to a cowl and as appropriate correct the provision of a cowl.
  6. Check serviceability of functioning of the lock of a cowl. At a lock otpuskaniye the cowl has to rise slightly breakthrough, allowing to reach fingers a latch clamp.
  7. For adjustment of the lock weaken fixing bolts (see an accompanying illustration) and shift the lock in the required direction. Tighten bolts.
1 — the lock
2 — bolts