798646e1

11.8. Removal and installation of the valve - pressure regulator

Removal

 PERFORMANCE ORDER

  1. Car back also establish to Poddomkratta it on props.
  1. Disconnect a driving spring from the valve (location of the valve - the regulator of pressure is shown on an accompanying illustration).
  1. Disconnect brake tubes from the valve. Zakuporte the open ends of tubes in order to avoid excessive losses of liquid and for the purpose of prevention of hit in hydraulic system of dirt.
  2. Give fixing bolts and remove the valve from the car.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

  1. Tighten fixing bolts with the required effort.
  2. Pump over the brake system.
  3. Carry out trial runs of the car, checking serviceability of functioning of the valve - pressure regulator. If when braking constantly there is a blocking of back wheels, it is necessary to give the valve to a workshop of dealer office of manufacturer for performance of adjustment of a driving spring.

Do not try to disassemble the valve at all!