- Car front also establish to Poddomkratta it on props.
- Make sure that the tank of the main cylinder is filled with pure hydraulic liquid.
- Connect a piece of a transparent hose to the gate of pumping of the executive cylinder of coupling. Lower the second end of a hose in the transparent capacity which is partially filled with pure hydraulic liquid.
- Squeeze out a pedal of coupling and open the pumping gate. Close the gate and slowly release a pedal.
- Repeat the procedure of the previous paragraph until of the cylinder does not begin to go out hydraulic liquid, pure, free from bubbles.
- Remove a hose, lower the car on the earth and make its trial runs, checking serviceability of functioning of coupling.
|
|
